Specifications :
Tank: 16 gallon capacity. FDA high-density polyethylenematerial.Portability: Has single top handle for easy carrying when empty and dual double �wide integral side handles to facilitate two person handling when filled.
Features: Threaded cap and wide fill opening for easy filling, inspection and cleaning. In stand-by position, eyewash heads are protected in a recessed area from airborne debris. Drain hose provided with unit. No loose parts to get lost or damaged.
Color: Highly visible yellow arm distinguishes itself from the safety green tank allowing it to be located and activated.
Flashing time: Over 15 minutes of full flow pattern at not less than 0.4 gpm (1.5 liters per minute)
Mounting: Can be wall mounted (bracket included) or shelf mounted.
Eyewash preservative: One bottle of eyewash preservative additive 2 oz (59 ml)- included to permit storage of water for several months.
Haws 7501 Portable Eye Wash Station
Specifications :
Compact portable Model 7501 is ideal for remote locations. Using gravity to supply a continuous flow of clean water to injured personnel for a full 15 minutes at .4 gpm (1.5 L), this model is a reliable source for safety. Recognizing the 7501’s full patterned flushing feature, those working in remote areas can�t help but feel confident with this piece of emergency equipment day after day.
Featuring a FDA approved high-density green polyethylene tank easily activated by pulling the yellow activation arm down to the open position
A wide-fill opening with threaded cap permits easy inspection, cleaning and filling
Relocation is simple due to the easily mounted bracket (included) and light design of this 9 gallon (34.1 L) portable
Measurements: 14-1/2″ high, 22″ wide, 10-1/8″ (36.8 x 55.9 x 25.7 cm) deep. *Note: Unit must be wall hung
Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
The vast majority of Haws products qualify under the terms of the act. However, since different purchases often require subtly different responses, Haws recommends that the specific document requesting certification be sent to customer service for a specific answer.
Haws 8300 Combination EyeWash Shower
Specifications :
Model 8300 combination shower and eyewash features a 10″ ABS plastic showerhead and a stainless steel eyewash receptor with twin Soft-Flo ABS plastic anti-surge eyewash heads. A pull rod activates shower. Push flag or foot treadle activates eyewash. Pipe and fittings: 1 1/4″ Schedule 40 hot-dipped galvanized steel. Supply and waste: 1-1/4″ IPS.
Model 8300 is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Shower Head :10″ ABS Shower head.
Piping : 1-1/4″ Hot dip galvanize piping.
Receptor : 11″ Stainless Stell bowl.
Eyewash Head : Twin-flo anti-surge head(8300)
Dust Cover : Protect head and automaticallyrelease With Water pressure.
Activation : Stay open valve with stainless steel ball and Stem.
Sign : Universal emergency sign.
Stream Control : Automatic Pressure Compensation flow Control.
Connection : Intel : 1-1/4″ IPS Waste : 1-1/4″ IPS
Haws 7360BT Emergency EyeWash
Model 7360BT-7460BT wall mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors� office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature�s ocular cavity drain.
Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness
Features a round 11″ (27.9 cm) stainless steel receptor, aluminum wall bracket and tailpiece and trap
Includes a mesh in-line strainer to collect line debris, and ball valve with stainless steel ball and stem for durability
Supply: 1/2″ IPS. Waste: 1- 1/2″ IPS
Blue Eagle EW-402 Emergency Eyewash
Spesifikasi :
Emergency Eyewash EW-402
Emergency eye was (wall mounted type)
Material of basin : stainless steel
Diameter of basin : 30 cm
Sprayheads With Protective Convers
Blue Eagle EW-407 Emergency Eyewash
Spesifikasi :
Emergency Eyewash EW-407
Emergency eye was (wall mounted type)
Material of basin : stainless steel
Diameter of basin : 30 cm
Diameter of floor Flange : 25 cm ( Stainless steel )
Sprayheads With Protective Convers
Emergency eye was (wall mounted type)
Material of basin : stainless steel
Diameter of basin : 30 cm
Diameter of floor Flange : 25 cm ( Stainless steel )
Sprayheads With Protective Convers
Blue Eagle EW-607 Emergency Eyewash
Emergency eyewash and Drench Shower EW-607
Material of basin : stainless steel
Diameter of basin : 30 cm
Diameter of floor Flange : 25 cm ( Stainless steel )
Sprayheads With Protective Convers
Copper alloy Shower heand
Material of basin : stainless steel
Diameter of basin : 30 cm
Diameter of floor Flange : 25 cm ( Stainless steel )
Sprayheads With Protective Convers
Copper alloy Shower heand
Fend All Porta Stream I Emergency Eyewash
Solution : Versatile flushing fluid options include Sperian Saline concentrate, Sperian Water Additive, 1 gallon container of Sperian Saline solution
Spesifikasi :
Flow Duration : 6 minutes
Dimension : 15 1/2" L x 22 1/2" H x 13 1/2" D
Capacity : 6 gallons
Maintenance : Replace Sperian Saline solution every 6 months, replace Sperian water additive every 4 months
Fend All Porta Stream II Emergency Eyewash
Spesifikasi :
Solution : Versatile flushing fluid options include Sperian Saline concentrate, Sperian Water Additive, 1 gallon container of Sperian Saline solution
Flow Duration : 15 minutes
Dimensions : 19 3/4" L x 24" H x 19" D
Capacity : Large 16 gallon (60.5L) capacity permits thorough flushing by providing 0.4 gpm over the entire 15-minute flushing period required by ANSI Z358.1-2004.
Maintenance : Replace Sperian Saline solution every 6 months, replace Sperian water additive every 4 months
Flow Duration : 15 minutes
Dimensions : 19 3/4" L x 24" H x 19" D
Capacity : Large 16 gallon (60.5L) capacity permits thorough flushing by providing 0.4 gpm over the entire 15-minute flushing period required by ANSI Z358.1-2004.
Maintenance : Replace Sperian Saline solution every 6 months, replace Sperian water additive every 4 months